MuttFence.com Blog

The Innotek Contain ‘N’ Train Systems are great products because they combine the features of an in-ground fence with the flexibility and control of a full 150 yard remote trainer.

So how does one remote control work with both dogs? Below is a picture of the Innotek Remote Control – this one is for an IUC-5100 Ultasmart Contain ‘N’ Train System.

Shown here is the remote control for the Innotek Ultrasmart Contain 'N' Train System

There are several buttons on the unit used to switch it on, adjust the stimulation, boost the stimulation, and to apply stimulation.

This button is used to switch the remote between dogs.

The number on this display shows “1″ and after switching, it will display “2″. This requires an additional collar for a total of two (2) dogs.

The Innotek IUC-5225 Additional Receiver Collar available from the MuttFence.com Retail Store.

The Innotek Contain ‘N’ Train Systems are available from the MuttFence.com Retail Store.

The Innotek SD-3000 Basic Contain ‘N’ Train System is both a combined fence and 150 yard remote trainer, featuring a lightweight, hand-held remote.

A regular fence collar will not work with the remote trainer, so you need to get the Innotek Receiver Collar that is compatible with the SD-3000 fence, and this model is the SD-3125 Basic Contain ‘N’ Train Extra Receiver Collar for the SD-3000 Fence.

As with all of our collars, these are in-stock, they ship out with FREE 2nd-Day Air, same or next day from our warehouse.

Innotek SD-3125, compatible with the SD-3000 Contain N Train, On Sale, FREE 2nd Day Air Shipping from the MuttFence.com

There are two Innotek Ultrasmart Fences available. The Innotek IUC-4100 Ultrasmart Pet fenceing System is a fence only, and the Innotek IUC-5100 Ultrasmart Contain ‘N’ Train Pet Fencing System is a combined fence and 150 yard remote trainer.

Each of these products come with one collar, the IUC-4225 for the IUC-4100 Ultrasmart Fence, and the IUC-5225 for the IUC-5100 Ultrasmart Contain ‘N’ Train. The IUC-4225 will work as a fence collar only on both systems, and the IUC-5225 will work with both the fence and the remote.

So, why would you buy one over the other?

• I want to add a dog to my Ultrasmart IUC-5100 Contain ‘N’ Train for the fence only
  You only need to get the IUC-4225 collar
• I want to add a dog to my IUC-5100 Ultrasmart Contain ‘N’ Train for both the fence and the remote trainer
  The collar you need is the IUC-5225
• I want to add a dog to my IUC-4100 Ultrasmart Fencing System
  An IUC-4225 collar is perfect

In a nutshell, if you have an IUC-5100 Ultrasmart Contain ‘N’ Train, you can add a dog just to the fence with the IUC-4225 Ultrasmart Collar, or to the fence and trainer with the IUC-5225 Ultrasmart Collar. FYI: The IUC-5100 has a two dog capacity for the remote trainer.

If you have an IUC-4100 Ultrasmart Pet Fencing System, you should only purchase an IUC-4225 Collar. FYI: The IUC-5225 would work with the fence, but it would additional cost for no benefit over the IUC-4225.

The IUC 5225 Collar has both Ultrasmart Fence and Remote Training Capability

The IUC-4225 is Fully Compatible with all Ultrasmart Fences, but has no Remote Training

Remember all of our receiver collars ship from stock, two-day air to any location in the continental United States at no extra charge!

Yes you can!  Innotek produces two systems that are both a fence and a 150-yard remote trainer. These systems are called Contain ‘N’ Train Pet Fencing Systems, and they are ideal if you are looking for a combined pet fence and trainer.

These items are versatile and there are two models available:

• Innotek SD-3000 Basic Contain ‘N’ Train Pet Fencing System
  and
• Innotek IUC-5100 Ultrasmart Contain ‘N’ Train Pet Fencing System

Contain 'N' Train Systems On Sale now with FREE Shipping

The great thing about both of these systems is that you do not need two units and two collars, just one unit can contain your dog both at your home and away.

The IUC-5100 is Ultrasmart^© because it features ReadyTest^© that lets you know the collar is working and fitted correctly.

OK, so a lady (who shall remain nameless) told us about an incident with her dog and his IUC-5100 remote training and fence collar – the Innotek IUC-5225. (The IUC-5100 is a Contain ‘N’ Train combined remote trainer and fence product). The collar and remote are shown below:

She has a very powerful dog who gets out of the yard and can cause havoc. When she first got her Contain ‘N’ Train unit, she was using only the training collar since the fence wasn’t installed yet. So, she’d put the training collar on the dog and let him outside, always keeping the remote nearby.

She realized she hadn’t seen him in a while, so she started calling his name. He didn’t answer. She went running around to his normal spots in the yard. Not there. She thought he’d got out again, so she started the collar stimulation. Nothing. All the way up to nine. Nothing. Then she walked around the corner of the house to see him sat, looking a little dishevelled, right where he’d been the whole time. By the back door!

She said he’s been a different dog ever since, but please, please, all of you out there: don’t allow the panic to set in. Act quickly and decisively if you think he’s trying to escape, but make sure he really is!

Most electronic products for containing your dog are single purpose. You either get an Electric Dog Fence, or you get a Remote Trainer. This means different collars, and remembering to change it when he leaves your yard. Also, it means that if you want to use the trainer with him in the yard, he ends up wearing two collars: one for the fence and one for the trainer.

The Innotek Contain ‘N’ Train Systems are perfect for this situation, since one unit is both the fence and the training system. No more changing collars, or looking for the other remote, just one product that does both jobs.

Contain ‘N’ Train Systems are available for people on a range of budgets, since both the SD-3000 Basic Contain ‘N’ Train, and the flagship IUC-5100 Ultrasmart Contain ‘N’ Train Systems are available.

We have a friend who has a particularly stubborn dog. We guess he’s a Catahoula/Mastiff mix because of his size and looks. He’s a sweet and loving family pet, but outside the fence, there’s no doubt that he can be a bad boy! His favorite tricks are chasing ATVs, cars, and cyclists and generally making a nuisance of himself. He’s over 100lbs and possibly the fastest dog I’ve ever seen!

Our friend has a wood fence, but the dog in question is also an escape artist. He would be out there in the yard, she’d turn around, look back and he was gone! She asked us what we recommend and we suggested an Innotek IUC-5100 Contain ‘N’ Train which is a combined dog fence and remote trainer.

She is happy to report that the dog has responded well to both the fence and trainer. Best news is that it is over 6 months since he last escaped!

Question:

Do you sell the Innotek IUC-5200?

Answer:

The Innotek IUC-5200 Contain ‘N’ Train Fence is no longer manufactured and has been replaced by the Innotek IUC-5100 Ultrasmart Contain ‘N’ Train Pet Fencing System.

The IUC-5100 is an excellent solution for someone who wants both an Electric Dog Fence and a Remote Dog Trainer.

Question:

How many dogs can I add to the IUC-5100?

Answer:

As you know, the IUC-5100 is a combined fence and trainer – which is why it is called a Contain ‘N’ Train system. The trainer is capable of handling two dogs. The kit comes with one IUC-5225 Ultrasmart Receiver Collar and extra collars are available.

To add dogs to the fence, you do not need the remote training feature. For this purpose, the number of dogs is essentially unlimited. To add dogs to the fence only, you still need an Ultrasmart Collar, and the IUC-4225 Ultrasmart Receiver Collar is perfect.